House Paint Teaser II

Yes, I know it's mean, but here's another teaser.



Till next time...

Cheers!
Larry

House Paint Teaser

Thought I'd toss out a teaser.

Here's your first look at the actual paints decided on for the house.



Have fun figuring out where each of those colors will be used!!

BTW - two of the colors don't look the way they should. The white colored one (center paddle) is actually a cream color; the gray looking one (3rd paddle from the right) is actually a light tanish green - they both look better on the house!

Till next time...

Cheers!
Larry

Special Post #1 - DeWalt

Hello Everyone!!

Sorry for the long delay again but we have been VERY busy!! We are sooooooo close to having the main part of the house painted! We will finish it - primarily the north side - next Spring. Soon I will be posting pictures of the paint.

In the meantime, here's a special post.

Remember way back on December 17, 2009 when I posted about the DeWalt tools I was asked to test?

If not you can read it here - A Gift from DeWALT.

Well, it's about time I give you an update on how this puppy works.

One word - AWESOME!!!

Yup, you heard me - AWESOME!!!

I have been using the DeWalt IMPACT READY™ tools a lot; especially with all the little repairs that have needed to be made during paint prep.

These tools, and accessories, are definitely well worth getting. Perhaps the main test we put them through that impressed us was the repair of the fascia on the west side of the house.

To refresh your memory go here - Soffit Just About Done.

Keep in mind, the wood we were having to drill into is well over 100 years old, and we think it is cottonwood. Over time cottonwood, like some other woods out there, gets incredibly hard over time. We were having to drill pilot holes constantly and even broke three drill bits while doing it. Even though we broke drill bits I'm happy to say they were not the DeWalt bits that came with the set o I wasn't too bothered by it.

Also, we switched from the typical battery that came with the set and started using the DeWALT DC9096 XRP 18-Volt 2.4 Amp Hour NiCad Pod Style Battery.

WOW!!!

This battery really upped the ante!

With one charge we were able to work the entire three days it took to repair the eaves. This included drilling pilot hose as well as screwing 3.5" and 4" screws.

Once this project was finished we decide to see just how long we could use the bigger battery before it died.

Result - 8 days.

Yup, we got 8 days of use out of the battery once it was recharged. This wasn't 8 days of constant use but it was used several times a day during those days. If I were to boil it down to days of constant use I'd say it lasted at least 4 if not 5 days.

Here's the drill after the battery finally gave up.

The drill itself is a little worn now, but it keeps going strong.

In a nut shell - I'm definitely a DeWalt guy from now on. Anytime one of the power tools need to be replaced it will be with a DeWalt.

Till next time...

Cheers!
Larry

Lots and Lots Done

WOW - it's been so busy around here I haven't even wanted to think about posting! All I've wanted to do is sleep - especially with the 10+ hour days we're putting in.

The following pictures, and tasks, were done between the 13th and 17th of October.

That being said, let's jump right in.

Here are a couple of the wasp nests we've found.

These two were not active but we've had a lot of wasps buzzing around; not sure where they are coming from though.

Also, while working on the fascia of the east gable we found a hole in the roof. It couldn't have been in a worst spot - right above a 25' drop. We had to cantilever the scaffolding out to work on it.

See that slash of bright light behind the nails? That's where the hole is - the sun is shining through.

In order to work on it we had to remove a bit more of the original fascia than we wanted to. All that's left is the flashing and shingles.

"Hello there!"

Yours truly's finger.

The hole is about 4 to 5 inches long and about 2 inches wide.

This was not a fun hole to repair. Sorry there are no pictures of the repair process but I was more concerned with safety than pictures at the time!

This is the underside after repair.

We inserted new wood under the hole and a metal cap from the top. Under the new piece of wood we installed the pieces that the gutter will be attached to. Then we used a generous amount of caulk to finish it off.

Not too bad of a repair is it?











We then found another issue to deal with - the top south east corner of the fascia was separating.

From this view it doesn't look too bad, but moisture could still get in and so it needed to be tightened up.













Don't you just love this scaffolding?

I let the father-n-law stand on top of that tiny platform in order tighten the corner. I spotted him (just in case) and made sure the contraption didn't collapse under him.








Once this problem was tackled I decided to go ahead and make the replacement fishscale for the east gable while he cut away the remains of the nails that had held in the bad moulding.

On to the fishscale.

From what I've learned there were seven basic styles of fishscale manufactured when our house was built. All the builder had to do was chose what they wanted and order it.

In our case the builders chose half-cove and octagon for the gables.

To our knowledge we are the only house in town with this combination. All the other houses have either round, octagon, half-cove and triangle and only use one style with no mix or matching. However, there is one other house that uses square and triangle fishscale on the house. Instead of in the gables though this house uses it as siding!

To make the repairs easier I cut out a half-cove and octagon template on my scroll saw.

This is the half-cove template.

I then cut out about 20 of each on the band saw.

For the most part it was fairly easy to replace the bad, and missing, fishscale; but sometimes I'd run into a real puzzler.

Here is the lower section of one of those 'puzzlers'.








First thing needing to be done was replace the under portion of shingle that covered the flashing. It also added a base to attach part of the upper portion to.

This is part of the upper portion.










This is another part of the upper portion (you can see the piece from the previous picture directly below it).

While installing it I hit something rather hard and it bent the nail. I just hammered it down since it was secure and would be covered anyway.

Next up was building the actual puzzle piece.

And here it is.

I would like to have installed it as a single piece but it just wasn't possible.



The upper arch area had to be removed and then reattached.







This is the same corner as the one in the last picture of the previous post - only repaired. The puzzle piece is in the middle.

All that needs to be done is the caulking of the divot in the puzzle piece.

You can see eight pieces of replacement fishscale in this corner. What you don't see are the many, little pieces of shingle it took to build it up for the finish fishscale.

Another puzzle piece. This one was easier but note the size of it compared to those around it.

75% of the fishscale were the same in general size but the other 25%, such as this one, were irregular and appear to have been used as bridging pieces.

The one you see here is a duplicate based on the remains of the original. I will talk about this process in a later post.

It took most of the day to replace the fishscale that could be reached without adding a second level to the scaffolding. When finished the workday was over.

We decided that the following day I would devote to glazing windows and SWMBO (since she would have the day off) would get to work with her father.

The next two pictures are of me glazing away at about 20 some-odd feet.





































Since turnabout's fair play I decided to take a few pics of SWMBO working.

Here she is helping her dad install the pieces of fascia that the guttering will be attached to.




She was so pleased with herself at this point - she actually used the cordless drill to attach a piece of the fascia.

It might not sound like a big deal but trust me, it was! Do you have any idea how hard it is to screw something into 100+ year old wood?! Also, the screws we needed to use were not small ones; take a look to the left of her father's hand - that's part of a 3.5" screw.

I will be doing a special post on what it took to deal with this old wood soon.

Here they both are working on the east gable; I was still glazing away.

At this point there is still only one level of scaffolding up there.

Before I leave you let me share a few more pics showing some of the small projects being worked on or finished during this time period.

The white stripe is what you need to notice in this picture. It is the new crown moulding that is under the built-up area the gutter will be attached to. When the gutters are installed they will create a 'double crown' effect.

This blob of gray is the the second layer in that rotten spot under the kitchen window. The gray stuff is bondo for wood. Once this is sanded down a bit another layer will be added.

Note that the exterior window casing above it is missing. It was in such bad shape I've decided to replace it.

This last one is just a few scraps of old clapboard attached to a board. The intention is for SWMBO to use it in order to make a decision as to what colors will be used on the fishscale.

As to this project - lets not go there... The colors have been decided upon but it was a very painful process. At least this mock-up did what it was to do. Perhaps I will share pics of it being used in a later post.

While we're on the topic of fishscale colors...

To give you an idea how far we have come since my last post, and how much I need to fill you all in on, the east gable is basically painted and finished. All we lack in order to call that part 'complete' is about 3 more hours of paint touch-up.

Well, it's late and I'm tired so I'll go ahead and close this post.

Till next time...

Cheers!
Larry

East Gable

Hello Everyone!

Well, we started work on the east gable Monday. Today we upped the ante and setup the first tier of the narrow scaffolding.

And here it is.

It really isn't that bad, I think I like it better than the big scaffolding.





My mind might be changed when we add the second tier though.

Another 'issue' that is becoming apparent are the wasps. We seem to have several of these buggers flying all around us. It appears that they have a nest somewhere up there but we cant find it. There are two, old nests at the apex of the gable but they are no longer being used.

This is how far we got as of 5:45 PM today. It was starting to get dark so the picture isn't that bright - sorry.




With that being said the downward sweep of the gable is finished, it's just hard to see in the fading light.

Here's one of the spots where the fishscale needs to be replaced. For some reason the squirrels really loved chewing on this section. Look close and you can even see where they chewed on the wide section of moulding (it's about 6" diagonally down from the paint).

For the most part I've already cleaned this section up and just need to replace the missing pieces.

Well, that's about it for tonight. Let's hope tomorrow goes well.

Till next time...

Cheers!
Larry

Soffit Just About Done

Hello again everyone!

This past week has been a slow one. A major snag was hit that brought the west side soffit repair to a screeching halt. The snag did not happen here but at the in-law's house - their well pump went out on them. They were without water from last Sunday night till late Friday night. Seeings how they NEEDED their water well more than we needed our soffit the father-n-law spent the whole week working on it.

Even though I offered to help him several times I spent the week doing something that needed to be done as well and it took a lot longer than expected - window prep. That's right, I spent the whole week working on prepping windows to be re-glazed. I still have two full windows and one pane to do and then I can glaze.

I should have spent Saturday glazing the windows but we decided to go to the big city and partake in the annual Historic House Tour.

It was an 'okay' tour. It's interesting to see what other people have done but I found myself scrutinizing details way too much. The best house on the tour was one that is in the destruction phase of a major restoration. We were really surprised that the owner did this. It takes a lot to let people in and see the mess you live in while doing it - we know this personally. Just think of the potential for liability!!! There were open spaces that allowed one to stand on the main floor and see, three stories up, into the attic.

This guy's house is a lot like ours but brick and about 50% larger. His house is the first one we have found with the same interior moulding we have!!! Also, his front room was one large room instead of a foyer. It would be as if we had two of our living rooms connected together. Also, his staircase was an open one and looked like something out of 'Gone With the Wind'. BTW - the house had been heavily divided up to make it usable as a 'safe house' for battered women in the 70s and 80s. The large front room was turned into three rooms and the staircase was even rotated 90 degrees. Part of of his restoration was the removal of the new walls and putting the staircase back in it's original location.

I was able to spend some time with him and swap horror stories and exchange ideas. I'm hoping to get to talk with him again in the near future when he isn't as distracted with people. I know we have to go back and see him at some point though because we have a part he could use. We found the original hot-water heater stand that would have been in this house and he has the original water heater for his house. We thought we'd let him have the stand.

Anyway, like I said earlier, I spent the week working on the windows. Originally we were not going to remove all the glazing but the more we worked around the windows the more we saw it needed to be done. In some cases the glazing fell out with barely a touch. In other cases I though dynamite would be needed. In those instances I used the Fein Multimaster; it has a blade that works great for removing stubborn glazing. The only windows left to do, other the the north side and the attic windows, are the top two on the west side. Other than these two the rest are ready for glazing. The other pane that has to be done will be addressed in another post.

Lets get back to the soffit.

I left off telling you just how bad it was and that the main board tying the rafter beams together had to be replaced. If you remember some the the ends of these beams were not in the best shape but still sound. Since we need to build up this area, in order to attach guttering, we decided to reinforce the rafter beams in order to handle the extra weight.

In this shot you can see how we did it.

We cut pieces of 2x6 into 1 foot lengths and tied them into the original rafter beams. The two you see here have not been tied in yet but it shows what it looks like.

While installing the extra pieces we were able to see just how much sag there was to the roof in spots. Some pieces slid in easily while others took a lot of effort.

We used Sure Drive Composite Deck Screws and they are absolutely wonderful! They self drill and are designed to pull both pieces of lumber together tightly. Even though they are designed for composite decking material they can be used with standard wood as well as treated lumber. The chemicals used in the treated lumber will not eat through these screws like they will the other screws. The hardest part was tying the new pieces in.

The original wood is so hard we had to resort to drilling pilot holes even for these special screws. To give you an idea how hard the wood was we broke three drill bits doing it. The pilot holes helped but the the fact remained that we had to cram an arm, and drill, into a 14" space in order to drive the screw. Along with this the scaffolding wasn't at the right height so we had to drag out a step stool to stand on to make the reach. So, while one of us drilled, the other spotted in case the one drilling slipped. The person who did the drilling had to use a lot of force to drill and was not able to hold on to anything for balance.

This process took almost an entire day.

The next step was installing the new 2x6 tie-in beam. This was a rather large sucker, a 12 feet long piece of treated lumber.

It isn't an easy task to manhandle something that size, and weight, up 20+ feet and we had three to move.

Once we got the first piece in place - I held the board up (while standing on tip-toes) while the father-n-law got a couple of screws in to secure it - we discovered another problem.

This time we were able to see just how uneven the settling along the edge of the roof was where the fascia and shingles met. The sag in the roof pushed the new board down in spots.


This is how we fixed the problem.

We are using a bottle jack and 2x4 to force the roof line back to it's proper location.

Do you see the 4x4 sticking out of the scaffolding platform? We know that the roof, even on the edge, weighs more than a ton due to the downward pressure of the roof spread along the support beams via the rafters. If we would have tried to use the bottle jack, by itself, the weight would have been forced downward, causing the jack to puncture the platform. To counter this we borrowed a 20' 4x4 and dragged it to the platform. This allowed the pressure to be evenly distributed to the metal part of the scaffolding and push the roof line up into place.

It worked, but was slow; after every four feet we would have to climbdown and move the scaffolding and readjust.

This process took another day.

Take a good look at this picture and you can see where the section of tie-in beam is about a 1/4 of an inch to 1/2 an inch lower than the roof beam. The father-n-law is removing the retaining screw he installed at the beginning so that we can adjust it.

Note the jack supported 2x4 to the right.

SWMBO took this picture.

We are now starting the process of straightening the roof line on the second piece of 2x6x12.













This picture SWMBO and I debated whether or not to post due to the difficulty in seeing the intent of the picture. You might have to click on the picture to see it better.

The intent was so you could see all four layers; the main tie-in beam with the beginnings of the new fascia, and built up area, on top.

The main tie-in beam (the three 2x6x12s) run the entire length. The first section of fascia board (made up of 1x6x12 ceder boards) ends just to the right of the lower window. We used a scarf joint on these boards in order to help lock their ends together and give a more finished look. The next section is the top fascia made up of 1x4x10s using scarf joints as well. To help maintain strength and stability the scarf joints of the upper fascia need to be staggered away from those of the lower fascia. Due to the staggering, and length of the upper fascia you can see where it ends just to the left of the lower window. The shortest piece of lumber you can see, the one on top of the others, is the first step in building up the space occupied by the original crown moulding. This must be done so that the guttering has a stable base to be attached to and is located directly under the roof flashing. This board is just a standard 2x4.

In this close up you can see the various layers.

Look close and you will see a dark line running along the roof beams; this is the new tie-in beam. Next you can see the first fascia layer and scarf joint. On top of this is the second layer of fascia.

These two layers of fascia reproduce the original fascia on the house and the original crown moulding would have been placed on top of it.

Next you can clearly see the 2x4 with the final piece of spacing on top of it - a 1x4 piece of ceder. We are not using scarf joints on the two spacing layers; one, they are not needed, and two, they will not be seen.

This top layer is where the guttering will be attached. Note the use of ceder as the outer portion that will come into contact with the guttering. Ceder is extremely strong for it's weight and it's also impervious to rot and insects.

The space that needed to be filled is almost 3" in profile. It might not sound like much but from the ground it makes the soffit/fascia area look massive. in order to disguise this we have decided to add something. More on this will be forth coming in a later post.

And here we have the finished fascia, at least on the west side.

This corner shot lets you see how nicely it all ties together and will allow the guttering to sit where it needs to be. If you look close you will notice that the final piece of spacing board, the 1x4 piece of ceder, has not yet been added to the south section.

You can also see that a length of the bead-board soffit is still missing.

Turns out this entire length of bead-board had to be replaced after all. The bad part is that the replacement pieces that are currently made are either too thin or too thick.

In order to get the 1/2 thickness of the original bead-board we bought 3/4" and cut it down. I also had to cut the tongue off the edge of the bead-board so it would go into place.

On Monday I installed the first piece of replacement bead-board.

I think it turned out great.

The other pieces will have to wait till later because I need help moving the scaffolding. Perhaps SWMBO can help me with that today.





Well, I guess I better go get busy.

Till next time...

Cheers!
Larry

Soffit Up-date

Hello again everyone!

Thought I'd take a quick moment to give you an update I should have done last night.

If you remember from the last post I mentioned we had ran into a bit of a problem on the west side. It's one of those problems I wish we would've known about when we first started work on that side.

Basically...the outer edge of the roof is rotted.

Our roof was built a bit different than modern roofs are. Most roof edges are made up of rafter edges, battens, purlins, eaves, barge board, etc.

Our roof edge has all of this with a couple of extras. Along with the typical battens, the boards that tie the rafters together, we have two battens stacked on top of each other right on the top edge. Also, most homes have an eave attached to the end of the rafters on non-gable ends. This is whats also know as the 'trim' if I understand it correctly.

Anyway, our house has a 2x6 tying the rafter ends together with all the extra boards attached to it. By-the-way, the rafters are also 2x6s.

All tied together this makes for an extremely strong roof edge that is uncommon today - just take a look at modern roof construction and you will see.

Unfortunately termites got to parts of the 2x6 that tied all the rafters together. On top of this wood-rot also set in.

Needless to say, it had to be removed. We are lucky though, it could have been a lot worse!

Following are some of the pictures that will kind of give you an idea just how bad it was.

This is the south west corner.

It amazes me how rotten the west board is yet the south board is in great condition.


In case you're wondering - that is wire mesh screen at the top portion of the corner. We think it was put there to keep squirrels, and other creatures, out. I don't think it helped much, I found nut remains all over.

Nasty looking ain't it?!











Even some of the original shake shingles were deteriorated.

Fortunately the double layer of 1x6 battens were only affected on the outer inch. The stability of the structure is still in excellent condition. With such a small amount of the battens being affected we will not need to replace them at this time. To do this it would require the removal of the roofing down to the rafters.

Eventually this will be done but it won't be for several years. With this future repair in mind we will be making the immediate, necessary repairs in a way that will not hinder the future repairs.

This is a close-up of the same spot.

The entire length was not this bad but bad enough to warrant complete removal of most of it.

A section further north.










As you can see, the ends of the rafters, with very few exceptions, are in excellent shape. Those that were affected only had damage in the area where the lowest tip/edge of the rafter met the edging board.

I'll get more pictures of this when I make the repairs.

Before I forget... You might have noticed that a length of the bead-board is missing. This section will also need to be replaced due to rot.

This is the north west corner.

The main board here is in excellent condition, just dirty. I decided to leave it alone - no sense in replacing something that doesn't need it.

Now this is what boggles the mind...

Remember in the first picture where the west board was rotten but the south board was perfect? At this corner the west board is perfect and the north board is rotten!! Isn't that just weird?

While we are on this picture you might have noticed the boards laying across the top of the scaffolding. These are part of the eave trim that are still in good condition and can be used. This will save in the cost of replacement.

Basically, to accomplish this task I had to remove all the main nails (about 5" in length). The board was so bad some of these could be removed by hand. I then had to cut the board, using the Sawzall, into manageable lengths and then pry them from the two batten boards tied into it. There were spots that were so rotten that as soon as a chunk was cut it just fell off. Lucky for me these pieces were rotten enough they didn't cause damage when they hit my head!

Once this was finished the nails that were sticking out had to be cut-off so that the replacement boards can be installed.

The whole process took most of the day. It would have gone faster if I didn't have to climb down from the scaffolding to move it over another 4'. I won't even mention the nasty mess.

Here's something else that amazes me... I'm using modern tools and safety devices/conveniences, such as the scaffolding. The original boards are solid 2x6s 16' long. These puppies were extremely heavy! How in the world did the manhandle these things in place back then?!?!

Anyway, moving on...

As you know, we're still scraping the soffits on the east side. They are finished for the most part but we ran into a rather interesting problem here as well.

Do you have any idea what this hole is for?

This is where the original downspout for the internal gutters came out on this section of the house.

It isn't going to be too big of a problem fixing this; the hardest part is going to be matching the moulding. This style of moulding is still made, but I think it is about 2/3rds the size of the original. To get the mouldings to match might be tricky. I'll keep you up-dated.

That's about it for now. I need to go take some measurements for a run to the lumber yard.

Till next time...

Cheers!
Larry